Yosion Machinery Committed to stable performance automatic pet bottle blowing machine production line since 1990s

Blowing Machine

Five things to pay attention to in the maintenance of the blow molding machine

by:Yosion Machinery     2022-04-18
Five things to pay attention to in the maintenance of the blow molding machine: 1. The bottle cannot be taken out of the mold after blowing. First, the mold should be opened, and the mold should be opened and closed manually. If it is normal, run it in the empty running state, if it is normal. Please check your exhaust time setting. If the exhaust setting is normal and the failure occurs every time you blow the bottle, then it can be judged that it is the problem of the exhaust valve. Please open the exhaust valve to check the condition of its spring and seal (this There is also a phenomenon that the exhaust sound is relatively loud or there is an unclean sound). If you encounter a situation where the mold cannot be opened by chance due to the normal production of many molds, please check whether the clamping pin has a segmented screw in it. In addition, please check whether the clamping force is too large. Standard readjustment. 2 The bottle is always pinched Whether the position of the manipulator is misplaced. 3. The two robots collide. In this case, you need to manually reset the robot. It is caused by misalignment. 4. The feeding position does not feed: There are several situations to be checked: Whether the hopper is out of material, if so: Need to feed quickly No: please check Whether the control contactor of the hoist is energized, if so, check whether the motor is energized and loaded as soon as possible, because this situation is likely to be caused by the preform (preform) stuck on the hoisting belt, at this time A very simple way is to manually help improve. If the control contactor of the inspection hoist is not in the electrified state, please check whether the preform detection electric eye is not in the same line with the reflector. 5. Feeding old card feeding tray: This situation is a headache. From experience, if the length of the bottle blank (preform) of the blow molding machine is longer and the cutting weight is larger, then this phenomenon is relatively rare.
Yosion Machinery is recognized as one of the leading manufacturer of in China.Trust in us and make Yosion Machinery your bottle blowing machine supplier. Our products will bring more economic value to you.
More about the most suitable , visit Yosion Machinery to get your offer!
Yosion Machinery offers not only the high-quality product but also the finest service, gives the customer with an expressive using experience.
Yosion Machinery always believes that the average profitability of our company is sufficient.
bottle blowing machine is sold in oversees market and has high reputation. Besides, our products are sold with reasonable prices.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...