The working principle of the whole system of the automatic plastic blow molding machine
is relatively simple. Since only the stretching cylinder and the pre-blowing part are required, the installation structure is also very convenient. The relationship between supply and demand should be grasped when using bottles of different capacities. Although this system only provides recycled gas to the two parts of stretching and pre-blowing, it seems to be a bit of a fly in the ointment, but its investment is small (take SBO10/14 as an example, only about 20,000, depending on the price of accessories), and the return is large (annual Cost savings of 160,000 to 200,000 yuan), strong independence (the original gas supply system can be used when there is a fault or other reasons), and high flexibility (simple and convenient installation), which is in line with the basic principles of our technical transformation project, making the product more With market competitiveness. When the machine is idling and the bottle is not blown, the low-pressure gas passes through the solenoid valve of the original pipeline to the gas storage pipe of the stretching cylinder, and the recovery gas storage pipe and the gas storage pipe of the stretching cylinder are isolated by a one-way valve. At the same time, the entire stretching air system and pre-blowing system are kept as they were before modification. When the automatic bottle blowing machine starts to blow the bottle, the high-pressure gas in the bottle enters the recovery gas storage pipe 6 through the exhaust pipe of the three-way valve 10 and the one-way valve 12. After the equipment runs for a circle and recovers enough gas, the manual solenoid valve is used. 1. Close the original stretched low-pressure air intake and pre-blowing intake lines. At this time, the stretching cylinder and pre-blowing air are supplied by the recovery air storage pipe. Due to the different volumes of bottles produced (0.6L, 1.25L, 2.0L, etc.) , we can properly open the exhaust valve 9 to discharge the excess air from the muffler to maintain the balance between the recovered air and the consumption. The valve must have sufficient flow to allow excess gas to escape. When the blowing is stopped, open the manual solenoid valve to supply gas from the original low pressure and pre-blowing lines.
Yosion Machinery has built its reputation on a commitment to providing quality products and services while rapidly responding to international needs for innovative products.
At Yosion Machinery, we make sure everything we do honors that connection – from our commitment to the highest quality in the world, to the way we serve our customers and communities to do business responsibly. We are looking forward to becoming trusted supplier of every customer, inquire us at Yosion Machinery!
The engineers and developers of Yosion Machinery are the best in their own professional way and we guarantee to provide related service to our dear customers.
While buying the products, make sure that you purchase them from a reputed and trusted seller - either online or offline. Yosion Machinery is specialised in the field of , offering a wide range of products like bottle blowing machine, pet bottle manufacturing machine, blowing machine maker,etc.