Bottle blowing machine simple problem solving

Bottle blowing into the bottle blowing machine cannot be removed from the mold. Should open the mould first, with a manual process, if the normal, with empty running state run it, if is normal. Please check your exhaust time Settings, if the exhaust set to normal, and every time as long as a bottle blowing failure, then can judge is the problem of exhaust valve, please open the exhaust valve check its spring and seal ( This kind of failure is also a phenomenon is the exhaust noise is larger or have not the voice of the net) 。 If you meet a lot of mold production normal chance to check on the open mold, please check the lock pin if there is a section of the screw inside, please check whether the clamping force is too big, if too big should be readjusted according to the standard. 4 bottles is a task of the position of the manipulator is misplaced. 5 the collision of two mechanical hand need to manually reset manipulator, is caused by the dislocation Yosion Machinery bottle blowing machine Machinery co. , LTD is one specialized is engaged in the research, manufacture and sales of PET bottle blowing equipment of high and new technology enterprise manufacturers.

Yosion Machinery as one who also teaches operations about how we use our whole operating system as a way to gain advantage and create considerable value and capture value in a sector where, in essence, the environment is quite hostile from a competitive point of view.

Yosion Machinery would like to provide our customers with as near perfect protection, as near perfect service as is humanly possible and to do so at the lowest possible cost.'

We sells bottle blowing machine and focus on operational procedure and manufacturing facilities plastic blowing machine manufacturers.

We are making bottle blowing machine available to you at a very low price.