1. Preheating The preform (preform) is irradiated by an infrared high temperature lamp, and the body part of the preform (preform) is heated and softened. In order to maintain the shape of the bottle mouth, the preform (preform) mouth does not need to be heated , so a certain cooling device is required to cool it. 2. Blow molding In this stage, the preheated preforms (preforms) are placed in the blow molds that have already been prepared, high-pressure inflation is carried out in them, and the preforms (preforms) are blown and drawn into the required bottles. The fully automatic bottle blowing machine
completes the two operations of blowing the bottle together through the operation of the manipulator, eliminating the process of manually placing the preheated preform (preform) into the blow mold in the middle. Greatly accelerated the rate of production. Operating Specifications 1. Before starting each shift, lubricating oil must be added to each moving part. (manipulator, manipulator guide rail, mold opening and closing guide rail) 2. The swing arm can be added once every (3-4) days. The large chain and small chain of the heating machine can be used once a month. Always check whether the main engine reducer and the heating machine reducer are short of oil. The main engine bearing can be added once every 3 months. 3. Before production, check whether the moving parts are firm, whether the screws are loose or falling off, especially in places with strong impact force, and whether the belt transmission part is abnormal. 4. Check whether the high-pressure air source, low-pressure air source, power supply, and water source are normal. 5. Check whether each emergency stop switch, safety door switch, and detection switch of the protection device are normal. 6. Check whether the heating head enters the embryo, and the embryo drop part works normally. If the embryo is not in place, the nut of the pressing device can be adjusted. 7. Check whether the lamp tube is damaged or broken. To be replaced in time. 8. Check whether each pneumatic component is leaking and whether the action is sensitive. 9. Check whether the triplet is abnormally leaking, whether it is blocked, and whether the water storage capacity of the water cup is too full. 10. When the solenoid valve of the automatic bottle blowing machine
is abnormal, it should be cleaned in time (every 3.5 million cleaning times).
If you have plenty of time, you can learn how to take care of plastic bottle machine
. Also, invest in the right blwoing machine company bottle blowing machine.
Get pet bottle manufacturing machine bottle blowing machine from only reliable exporters, go to Yosion Machinery for more details.
Yosion Machinery can promise that bottle blowing machine is one of the best products sold in the worldwide market at present.
Rewards and discount programs give customers more reason to come back for bottle blowing machine again, especially in the competitive retail and services markets.
Though the cost of these sustainability initiatives as bottle blowing machine can be high, harnessing the power of an ethical supply chain to appeal to conscientious consumers can be a smart move both ethically and financially.