1. Preheat the preform (embryo) through the infrared high-temperature lamp to heat and soften the preform (embryo) body part of the preform (embryo). In order to maintain the shape of the bottle mouth, the preform (embryo) mouth does not need to be heated Therefore, a certain cooling device is required to cool it. 2. Blowing molding. At this stage, the preheated preform (embryo) is placed in the already finished blow mold, and the interior is inflated with high pressure, and the preform (embryo) is blown and drawn into the required bottle. The automatic bottle blowing machine
combines the two operations of bottle blowing through the operation of the manipulator, eliminating the need for the manual process of putting the preheated preform (embryo) into the blowing mold. Greatly accelerate the rate of production. Operation specification 1. Before starting each shift, lubricating oil must be added to each movable part once. (Manipulator, manipulator guide rail, mold opening and closing guide rail) 2. The swing arm can be added once every (3-4) days. The large chain and small chain of the heating machine can be used once a month. Frequently check whether the reducer of the main engine and the reducer of the heating machine are short of oil. The main engine bearing can be added once every 3 months. 3. Before production, check whether the moving parts are firm, whether the screws are loose and fall off, especially in places with strong impact, whether the belt transmission part is abnormal. 4. Check whether the high-pressure gas source, low-pressure gas source, power source, and water source are normal. 5. Check whether each emergency stop switch, safety door switch, and protection device detection switch are normal. 6. Check whether the heating head enters the embryo and the embryo falls are working properly. If the embryo insertion is not in place, the nut of the embryo pressing device can be adjusted. 7. Check whether the lamp tube is damaged or broken. It should be replaced in time. 8. Check whether the pneumatic components are leaking and whether their movements are sensitive. 9. Check whether the triplet is leaking abnormally, whether it is blocked, and whether the water cup is too full. 10. When the solenoid valve of the automatic bottle blowing machine
encounters an abnormality, it should be cleaned in time.
Yosion Machinery's has been able to achieve excellent performance in an extremely competitive industry.
Always do our research, follow the rules and plans ahead for additional expenses. Expanding is the goal of Yosion Machinery; expanding properly is the goal of the wise business.
bottle blowing machine provider at Yosion Machinery offers a wide variety of in many options. quality is absolutely ensured if you choose us. welcome to visit our factory.