What are the preparations for the hollow blow molding machine before driving?
The hollow blow molding machine is strictly prepared for driving before driving, and its main contents include the following eight points: Point: the cooling water of the cooling material can turn on the energy, and the phenomenon that the screw is bitten is completely caused. Point: Preheat hydraulic oil. If the hydraulic oil temperature in the hollow blow molding oil tank is too low, the heater should be turned on immediately, which is generally installed on large machines. The third point: press the start button and then stop immediately to check whether the pump is running in the correct direction. The fourth point: the machine should be opened under the condition of no pressure in the hydraulic system. When turned on, adjust the pressure of the overflow system of each pump to pressure. There are often two pressure systems in large injection machines, one is the clamping unit and the other is the injection unit, and each of the two units has a pressure release space. After the pump stops, this pressure relief valve opens, and when the pump is working, the pressure relief valve closes the c switch. The fifth point: adjust the position of all stroke lifts, and make the moving template travel far away from the c switch. Point 6: Close the door. When opening the door on the operation side, make sure that all doors are closed when the machine is working. For large hollow blow molding machines, the mold closing movement will be stopped: if another door is opened further, the oil pump will stop working. Seventh point: turn on the heating and temperature adjustment system. Eighth point: install the mold c. Clean the mold surface and the contact surface with the hollow blow molding machine template before installing the mold. The ninth point: the hollow blow molding machine turns on the main switch of the control cabinet L, and adjusts the operation selection switch to the anti-rust oil in the jog or manual 1.
Yosion Machinery have long believed that management practices are an important element in productivity.
If you would like to solve your yosion bottle blowing machine problem by adopting a . Yosion Machinery, an experienced and professional peovider having won high reputation globally will be your bast choice. You won't be disappointed
Yosion Machinery has enlarged the scope of services, which can fully please customers' demands.
Yosion Machinery focuses on three key elements—process, people, and technology—the authors found that people of two seemingly opposite cultures are able to work together in a project-based environment to complement each other and reap mutual benefits for a win-win result.
Consistency and simplicity go hand in hand. That means aligning Yosion Machinery with the right platforms, speaking to the right customers with the right message, and selling the right idea.