Semi Automatic Pet Bottle Blow Molding Machine

PRODUCT DETAILS

The brand Yosion from the United States, north of California, by the Pacific Ocean and Others.A semi-automatic bottle blowing machine is a machine that is used to blow and mold plastic bottles. It typically consists of a machine base, an air compressor, a heating unit, a blowing unit, and a mold. The operator loads plastic preforms into the machine, and the machine then heats the preforms and uses compressed air to blow them into the desired shape of the bottle. bottle, cosmetics bottle,wide-mouth Jar ,PET can etc.

Machine advantages

-Plastic bottle blowing machine adopt double arm clamping,with high clamping,Action flexible.
- Adopt PLC control system, easy to oprate,maintenance conveniet,low-cost,time can be precisely controlled to 0.01seconds.
- air system will be designed to move and inflatable divided into two parts to meet blow,movements of different air pressure requirem ents.
- Using far infrared heater rotation frequency heating,the track to make heating uniformity,fast and reliable.
- Different of the heating lamp equipped with independent temperature control device to ensure that the best preform heating effect.
- Heating lamp under the direction can adjust according different preform.
- Operate only one person,do not need special training.
- Installatioon,start simple,Minimum space.
- Upgrade power efficency
- Simplified operation by HMI control panel
- Modular design facilitates maintenance capacity.
- Save investment and enhance capacity.

YS 880 Semi automatic pet blow molding machine

HS CODE : 8477309000
Product Volume: 0．2-2L
Hourly Production 0.6L 800-1000Pcs/Hr
Heater power : 380V 5-10kw
Blowing Air Compressor 2.0-3.0Mpa 0.4-0.5m3/min
Working Air Compressor :0.8Map 0.3m3/min
Mould Stroke : 150mm
Mould Thickness / Width
120-180mm 320mm
Stretching Stroke
120-180mm
Stretch Length
350mm
Machine Weight
800kg
Machine Dimension
1320x580x1550mm 1600x580x1400mm
○●All specifications and designs are subject to change without notice.

YS 880S Semi automatic PET bottle blow molding machine

*Machine touch screen +pre-blow system +bottle take out full automatic
HS CODE : 8477309000
Product Volume: 0．2-2L
Hourly Production 0.6L 100-1200Pcs/Hr
Heater power : 380V 5-10kw
Blowing Air Compressor 2.0-3.0Mpa 0.4-0.5m3/min
Working Air Compressor :0.8Map 0.3m3/min
Mould Stroke : 150mm
Mould Thickness / Width
120-180mm 320mm
Stretching Stroke
120-180mm
Stretch Length
350mm
Machine Weight
800kg
Machine Dimension
1320x580x1550mm 1600x580x1400mm
○●All specifications and designs are subject to change without notice.

Configuration of main components of the machine

Remark:This configuration without air recycle, the automatic pet bottle blowing machine price will be different if add recycle system.

这里可以自定义设置

YS15-4 Semi automatic PET bottle blow molding machine

*Machine touch screen +pre-blow system +bottle take out full automatic

HS CODE : 8477309000

Blow Moulding Machine	Type	4cavities
	Theoretical output	2400Pcs/H
	Product Capacity	0.1-1.5L
	Diameter of Bottle Mouth	15-38mm
	Diameter of Bottle Body	40-90mm
	Height of Bottle	300mm
	Max.Mold Thickness	240mm
	Effective Area of Mold	480x350mm2
	Clamping Stroke	150mm
	Clamping Force	200KN
	Diameter of Stretch Pin	12mm
	Max.Stretch Stroke	370mm
	Total Power	18KW
	Overall Weight	2.0T
	Working Pressure	1.05-1.25MPa
	Blowing Pressure	2.2-3.5MPa
	Cooling Water(6-10℃)	0.3-0.5MPa
	Size	1660x1000x2550mm，2600kgs
	Size of Oven(L.W.H)	1800x750x1700mm,700kgs

4,YS15-2S Semi automatic PET bottle blow molding machine
HS CODE : 8477309000

General Information	YS15-2S
Product Volume	0．2-2L
Hourly Production	0.6L 1600-2000Pcs/Hr
Heater power	380V 5-16kw
Blowing Air Compressor	2.0-3.0Mpa 0.8m3/min
Working Air Compressor	0.8Map 0.8m3/min
Mould Stroke	150mm
Mould Thickness / Width	120-180mm 320mm
Stretching Stroke	120-180mm
Stretch Length	350mm
Machine weight	1250kg
Machine dimension	1320x580x1550mm2 1600x580x1400mm1
All specifications and designs are subject to change without notice.

Semi automatic PET bottle blow molding machine spe

Video Center

MACHINE OPERATION DETAILS

Yosion bottle blowing machine manufacturer specializes in the research and manufacture of two-step PET/PP bottle blowing machine. Contact us for inquiy pet bottle machine and semi automatic pet blowing machine.

YS-5L Semi automatic PET bottle blow molding machine

Detailed Product Description YS 18-2S Double arm relay control with far-infrared heater the max. capacity are 6 liters apply to blowing to pet,pc,pp or pe as raw materials to any shape of drinking bottle,mineral water bottles,pesticide bottles,cosmetic bottles.
General Information
Product Volume: 1-6L
Hourly Production: 5L 700Pcs/Hr
Heater power: 380V 5-12kw
Blowing Air Compressor: 2.0-4.0Mpa 0.5m3/min
Working Air Compressor: 0.8Map 0.4m3/min
Mould Stroke: 220mm
Mould Thickness / Width: 160-250mm 360mm
Stretching Stroke: 130-230mm
Stretch Length 350mm
Machine Weight: 1000kg
Machine Dimension: 2000x800x1800mm 2200x600x1500mm
○●All specifications and designs are subject to change without notice.

YS 10L Semi automatic PET bottle blow molding machine

General Information
Product Volume: 6-10L
Hourly Production: 300-400Pcs/Hr
Total power: 380V 42kw
Blowing Air Compressor: 1600L/min
Working Air Compressor: 600L/min
Clamping Stroke: 280mm
Number of Cavity: 1-2
Stretching Stroke: 450mm
Clamping force: 26000kg
Machine Weight: 11000kg
Machine Dimension: 1950x650x1750mm ,2170x670x1600mm
○●All specifications and designs are subject to change without notice.

YS 5 gallon Semi automatic PET bottle blow molding machine

General Information: YS5 gallon
Product Volume: 10-20L 5-Gallon
Hourly Production: 40-60Pcs/Hr
Heater power: 380V 10-24kw
Blowing Air Compressor: 2.5-5Mpa 0.8m3/min
Working Air Compressor: 0.8Map 0.8m3/min
Mould Stroke: 350mm
Mould Thickness / Width: 250-400mm 360mm
Stretching Stroke: 130-200mm
Stretch Length 500mm
Machine Weight: 2000kg
Machine Dimension: 2400x1800x1850mm 2250x650x1600mm
○●All specifications and designs are subject to change without notice.

PARAMETER

YS-PP Semi automatic PET bottle blow molding machine

Oven spec	Data
Center distance	381mm
Max thread size	70mm
Length of lamp	650mm
Input power votage	380V
Total power	64 kw
The actual use of power	10-15kw
Appearance size	4.20.751.5m
Weight	700kgs