The temperature problem of the blow molding machine in production, blow molding machine-mechanical professional blowing equipment manufacturer

During the production of the bottle blowing machine, we have always been more concerned about the temperature problem, but if we can’t master the skills and methods well, it will affect our later use. Therefore, we might as well do the right work. , Then let's briefly analyze it next. (1) Melting temperature TM: For crystalline polymers, it refers to the temperature at which the three-dimensional remote ordered state of the macromolecular chain structure transforms into the disordered viscous fluid state, also known as the melting point. It is the lower limit of the crystalline polymer molding processing temperature. (2) Glass transition temperature TG: refers to the transition temperature of an amorphous polymer (including the non-crystalline part in a crystalline polymer) from a glass state to a highly elastic state or from the latter to the former. It is the lowest temperature at which the macromolecular segment of the amorphous polymer moves freely, and it is also the upper limit of the working temperature of the bottle blowing machine.>Aluminum plate spot welding machine (3) No-flow temperature: the highest temperature at which no flow occurs under a certain pressure. It is to add a certain amount of plastic into the barrel at the upper end of the capillary rheometer die, and heat it to a certain temperature. After the constant temperature is known to be 10min, apply a constant pressure of 50MPA. If the material does not flow out of the die, the temperature of the material is released Increase the difficulty by 10 degrees, apply the same constant pressure after holding for 10min, and continue to do so until the melt flows out of the die. The blowing machine reduces this temperature by 10 degrees, which is the non-flowing temperature of the material. (4) Flow temperature TF: refers to the temperature at which the amorphous polymer changes from a highly elastic state to a viscous flow state. It is the lower limit of the processing temperature of amorphous plastics. (5) Decomposition temperature TD: When the temperature of a polymer in a viscous fluid state is further increased, the degradation of the molecular chain will be aggravated, and the temperature at which the molecular chain of the polymer is significantly degraded is the decomposition temperature. When the plastic bottle blowing machine is in use, if you can master some operating methods and skills, it will not only benefit the use effect, but also increase the service life.
Looking for a producer to fix your bottle blowing machine problems? Then contact the bottle blowing machine experts at Yosion Machinery, offering a wide range of products across the global market. Visit Yosion Machinery to find our best offer!
All of the experts Yosion Machinery consulted stressed that the best recovery plans are the ones made before you need them, not afterward.
The risk of plastic blowing machine manufacturers is reduced by pet bottle manufacturing machine with the consumption of .
On top of making sure all our day-to-day operations are running smoothly, Yosion Machinery needs to ensure that we're keeping up with all the quality standards of bottle blowing machine.