A bottle
blowing machine, no matter how efficient, simple and easy, if lost security, also lost its application value.
In recent years, due to the
bottle blowing machine safety accidents often appear in order to strengthen the management of production and equipment, improve the level of the operation of the operating personnel, to ensure the safety production equipment, improve labor productivity, make continuous stable production, ensure product quality, reduce production costs.
Per shift boot before, it is necessary to add the lubricating oil in the moving parts.
(
Robots, robot guide, opening and closing mould guide)
Swing arm can be (
3 -
4)
Add a days.
Heating machine big chain, small chain can be once a month.
Often, heating machine, check the host reducer reducer is short of oil.
The host bearing can be (
2 -
3)
Plus one times a month.
Check all moving parts are in strong before production, if the screw loose fall off, especially the impact is stronger, belt drive part.
Check the high pressure gas source, low pressure air supply, power supply, water supply is normal.
Check the urgent stop switch, safety door switch, protection device detection switch is normal.
Check the heating head into the embryo, embryo parts work is normal.
Insert embryo does not reach the designated position adjustable nut pressing device.
Check whether the tube is damaged, and rupture.
To timely replacement.
Check whether the pneumatic components leakage, the movement is sensitive.
Check whether the triplet is abnormal leakage, blockage, water cup water is too full.
Bottle blowing mechanical and electrical magnetic valve when the weather is abnormal, should be timely cleaning (
3. 5 million per bottle blowing clean)
。
Bottle blowing mold must be regular cleaning, polishing.
When you start the high and low pressure gas source switch must be slow action, to prevent air supply velocity of fast dirt blow solenoid valve and at the same time open the exhaust valve for 30 seconds, ensure that the air is clean.
Must be sure that when the machine starts good mechanical part, machine inside no one, no foreign body.
Especially the crank position, so as not to hurt.
Close the security at the same time.
When starting the machine must first start the motor, 30 seconds delay start heating machine, in case of voltage fluctuation.
Sure didn't open the cooling water before you start heating.
Warm boot (
2-3)
Minutes later, wait for drying oven temperature rise even in embryo button.
Bottle blowing on electricity will open at the same time, otherwise is not bottle blowing.
Machine must pay close attention to whether the machine has abnormal noise, when to do early detection, timely stop early.
In case of emergency, press stop button, emergency brake.
Then according to the causes of the formation of the situation analysis, find the problem quickly resolved.
After machine run properly, any parts of the body do not avoid manipulator into machine cuts.
After such as machine has sound can slow down.
Machine after normal production, the operator must always observe the quality of the bottle, so as to avoid the voltage fluctuation affects the quality of bottle blowing or other reasons.
Machine maintenance, breakdown maintenance by touch screen button, in order to ensure safety maintenance.
Nowadays, it is very common for us to utilise in pet bottle manufacturing machine. And the quality of is decisive to production efficiency.
We are proud to be one of the largest suppliers out there. You will love what we offer for your bottle blowing machine solution. Check our website at Yosion Machinery or call to talk to our customer service department with any questions you may have.
First, in sparking the initial idea for a company based on manufacturing technology; and second, in designing a solution that could meet a clear market need for solving issues related to bottle blowing machine blwoing machine company.
Yosion Machinery offers not only the high-quality product but also the finest service, gives the customer with an expressive using experience.
