The production and problems of plastic bottles

The questions about plastic bottles are as follows: (1) When designing a squeeze plastic bottle, if the material is high-density polyethylene or polypropylene, the cross-section of the plastic bottle should be rectangular or oval. For other flexible plastic bottles, the cross section is preferably round. This facilitates the extrusion of the contents from the plastic bottle. The plastic parts used in conjunction with the plastic bottle mouth are mainly bottle caps and sealers. The design of the plastic bottle mouth should be focused on; considering how to make the plastic bottle mouth better match the bottom of the plastic bottle with the cap and the sealer, it is the weak part of the mechanical properties of the plastic bottle. Therefore, the bottom of the plastic bottle is generally designed to be inwardly concave; the corners of the plastic bottle and the inner recess are made of larger arcs. In order to facilitate the stacking of plastic bottles and increase the stacking stability of plastic bottles, an inner groove should be designed at the bottom of the plastic bottle. (2) When labels are used on the surface of plastic bottles, the label surface should be flat. One can be designed on the surface of the plastic bottle“Sash”, so that the label is positioned accurately and does not move. In blow molding, the part that the parison blows first touches always tends to be the part that hardens first. Therefore, the wall thickness of this part is also larger. The edge and corner parts are the parts where the parison is inflated and finally contacted, and the wall thickness of this part is relatively small. Therefore, the edges and corners of plastic bottles should be designed with rounded corners. Changing the surface shape of the plastic bottle, for example, the middle of the plastic bottle is relatively thinner, and adding circumferential grooves or ribs on the surface of the plastic bottle can improve the rigidity and bending resistance of the plastic bottle. Longitudinal grooves or stiffeners can eliminate deflection, sagging or deformation of plastic bottles under long-term loads. (3) The printing surface of the plastic bottle is the part where consumers pay the most attention. The printing surface should be flat and continuous; if the plastic bottle contains structures such as handles, grooves, and reinforcing ribs, care should be taken not to cause inconvenience to the printing operation. The oval-shaped plastic bottle has higher rigidity, but the manufacturing cost of the mold is higher. Therefore, in order to ensure the rigidity of the plastic bottle, in addition to selecting materials with high rigidity, the rigidity and load-resistant strength of the plastic bottle should be enhanced through the shape design of the plastic bottle. Zhangjiagang specializes in the production of automatic blow molding machines, blow molding machines, PET blow molding machines, etc. Welcome to consult.
Yosion Machinery supports their market leadership with savvy marketing skills to create an prime brand.
What are you waiting for? Get out there and buy some of the most effective at Yosion Machinery.
With the help of a blwoing machine company bottle blowing machine, pet bottle making machine manufacturers becomes a reasonably easy job that you can take care of simply and swiftly.
According to the market analysts, exports from Yosion Machinery facilities in China will exceed the forecast.