Precautions and steps before using the automatic blow molding machine, recommended by the manufacturer

Fully automatic blow molding machine has become the mainstream blow molding equipment for bottled water. Many users have many questions about the operation and use of the automatic blow molding machine after purchasing the automatic blow molding machine. Today, the blow molding machine The manufacturer explains to everyone the steps of using the automatic bottle blowing machine and the precautions during the use of the automatic bottle blowing machine. Precautions before starting the automatic bottle blowing machine: 　　 1. Check whether the power supply is connected normally 2. Check whether the auxiliary equipment such as high pressure air compressor is working normally 3. Check whether the triple switch is leaking, each emergency stop switch, safety door switch, protection device detection Whether the switch is normal 4. Check whether there is any abnormality in the heating lamp, such as breaks or cracks. 5. Make sure that all the above auxiliary equipment and accessories are working properly before starting the machine. Steps of using the automatic blow molding machine 1. Press the blow molding machine control Panel start button, the machine starts normally 2. Put the mold in the clamping state, test whether the blowing is normal 3. Wait for 2-3 minutes to heat up, adjust the blow molding machine stability to a suitable stability, the temperature of each lamp is different, It needs to be adjusted to the appropriate temperature in accordance with the guidance of the blow molding machine manufacturer. When you turn it on again next time, you don't need to adjust the temperature, just wait for the blowing machine to heat up for 2-3 minutes, and observe whether the temperature is appropriate.　　4. If you encounter an emergency, you need to press the emergency button to stop the machine. Daily precautions: 　　1. Maintain the machine at regular intervals. For the maintenance specifications, please refer to the 'Blow Molding Machine Daily Maintenance and Specifications' of Jinyi Blow Molding Machine for maintenance or directly consult the after-sales technical support engineer online for you .　　2. Clean and wipe the mold regularly and ensure the cleanliness of the mold.　　 3. After shutting down, the excess gas and water stored in the machine itself must be drained. Summary: The above are the precautions and use steps of the automatic bottle blowing machine. When you use the automatic bottle blowing machine, you only need to pay attention to it. Regular maintenance of the bottle blowing machine can increase the service life of the automatic bottle blowing machine. , Better production.
Yosion Machinery's products, whether interim or permanent, comply fully with all appropriate producing regulations.
Yosion Machinery is a reliable company that offers wonderful . In addition, the company also provides related components to make it more efficient. To know more, go to Yosion Machinery.
The team of engineers and developers at Yosion Machinery are the best in their own way and we promise to provide timely service to our esteemed clients.
Yosion Machinery believes that the average profitability will be sufficient.
blowing machine maker bottle blowing machine may be adapted for use at any pet bottle machine price and is suitable for blwoing machine company.