Working principle of the automatic plastic bottle blowing machine
for the whole system is simple, because of the need to supply the drawing of cylinder and blowing this part, the installation structure is also very convenient, it is worth noting that the recycle gas and the balance between consumption volume, therefore in the production of different volumetric flask son should grasp the good relationship between supply and demand.
Although the gas recycling system only can provide a drawing, blowing two parts, seem a bit a blemish, but its small investment,
SBO10/14, for example just twenty thousand or so, depending on the accessories price)
And return (
Save cost 16 ~ 200000)
, independence is strong,
A failure or other reasons, can use the original gas supply system)
, high flexibility,
Simple installation, convenient)
, very accord with the fundamental principles of our technological transformation project, make the product more market competition ability.
In the boot when idling not bottle blowing, low pressure gas through the pipeline to tensile cylinder solenoid store trachea, back to the collection and storage by one-way valve isolation between trachea and tensile cylinder store, back to the collection and storage endotracheal without the low pressure gas, the gas circuit system of the stretching and blowing system to keep the original state before the unimproved.
When equipment began to bottle blowing, high pressure gas bottle through the 3-way valve (pos. No. 10 exhaust pipe through one-way valve 12 into purchasing and trachea back 6, equipment to run a circle of recycling enough gas, use the manual electromagnetic valve 1 closed original tensile low pressure inlet and blow air inlet pipe, the tensile cylinder and turn from return purchase tracheal gas blowing, due to different production bottle volume (
6 l, 1。
25 l, 2。
0 l, etc. )
, we can open the discharge valve of 9 appropriately, excess capacity from a silencer, maintain the balance of the recycle gas and the gas consumption, such as back into purchasing and trachea still has residual gas, 4 by 15 bar relief valve, relief valve must have enough flow, therefore, can make the extra gas discharge, stop bottle blowing open the solenoid valve manually by the original low pressure and blowing pipeline gas supply.
Yosion Machinery is devoted to satisfy our customers with a wide array of the finest using experience.
The expert engineers of Yosion Machinery always develop with utmost precision so that all quality standards are met during the production. we are looking forward to becoming a trusted supplier of customers. visit us at Yosion Machinery.
Yosion Machinery emphasizes our commitment to quality in our laboratory and R&D services.
A quality monitoring group created for ensuring that Yosion Machinery manufactures bottle blowing machine accoording the strictest standard.