loading

YUANYOU Committed to stable performance automatic PET bottle blowing machine production line since 1990s.

PET one-step bottle blowing machine working principle and characteristics

PET one-step bottle blowing machine is a two-way stretch blow molding process, in this process, the PET chain is two-way stretch and arrangement, orientation, thus increasing the bottle wall mechanical performance, can improve the tensile, tensile, impact strength, and has excellent air tightness. Although stretching helps to improve the strength, but also cannot too stretched, to control a good stretch blow ratio. Bottle blowing is between the glass transition temperature and crystallization temperature, usually operate between 90 ~ 120 degrees. PET show is within the range of the high elastic state, blow molding, cooling rapidly after setting into a transparent bottle. Tensile & ndash; blow molding process are: A blow & ndash; Second blow, three action time is very short, but be sure to cooperate well, especially the former two step determines the overall distribution of material, by the quality of bottle blowing. Thus to recuperate good: stretching start timing, stretching speed, blowing the start and end time, air pressure, blowing air flow, etc, be like likely, can operate bottles billet temperature distribution of the whole, bottle preform, both inside and outside wall temperature gradient. In the process of blow molding, cooling rapidly, bottle wall inside the induced stress occurs. For filling bottles, it can be resistance to internal pressure, merits, but for PET bottle bottle blowing machine have to make sure it high above the glass transition temperature for free. PET one-step baked road and bottle blowing bottle of bottle blowing machine characteristics of the platform space, reduces the open mold time, improve the efficiency of the bottle blowing, at the same time increased the production. 1. Compact appearance design to reduce the space, reduce the production cost, enhance the competitiveness. 2. Automatic operation system. 3. The advanced control system, simple and convenient control panel. 4. Simple linear operation system independently. 5. Characteristic of the heating system, temperature control precision, mediation is simple. 6. Special storage device. 7. PET bottle blowing machine cooling system can reach ideal cooling effect. The raw material of PET, PET raw white or light yellow, highly crystalline polymer, creamy appearance with light. In a wider temperature range has the excellent function of physical machine, used for a long time temperature can reach 120 ℃. Electrical insulation is better, until under high temperature and high frequency, the motor can still work normally, but the corona resistance is poorer, creep resistance, fatigue resistance, frictional resistance, size standard is very good.

Yosion Machinery is considered as one of the leading supplier of bottle blowing machine products in China.

For decades, Yosion Machinery has searched for and found a number of secrets to help customers through out the world to achieve blwoing machine company by providing useful and efficient solutions. Go to Yosion Machinery to learn about some of those secrets.

Yosion Machinery offers the best for indoor as well as outdoor use. To find your ideal at attractive offers, visit us at Yosion Machinery.

GET IN TOUCH WITH Us
recommended articles
Introduction to Injection Molding Machine

Injection molding machine is a manufacturing process for producing parts by injecting molten material into a mold.
From the moment a consumer picks up a bottle of their favorite beverage, to the moment they twist off the cap and take a refreshing sip, the design of PET preforms plays a crucial role in the success of the entire bottling process.
Advanced Software Revolutionizing PET Preform Design

In recent years, advanced software has completely revolutionized the way PET preform design is carried out.
As the demand for bottled beverages continues to rise, so does the environmental impact of the PET bottle blowing industry.
When it comes to the PET bottle blowing industry, there are a myriad of regulatory challenges that companies must navigate in order to remain compliant and successful.
When it comes to producing plastic PET bottles, selecting the right bottle making machine is crucial for achieving high-quality and efficient production.
Advancements in Plastic PET Bottle Making Machines: What’s New?

Plastic PET (Polyethylene Terephthalate) bottles have become a ubiquitous part of our daily lives.
Plastic PET bottle making machines have revolutionized the production process for plastic bottles, making it faster, more efficient, and cost-effective.
Is it Time to Upgrade Your Plastic PET Bottle Making Machine?

When it comes to manufacturing plastic PET bottles, keeping up with the latest technology and equipment is crucial for staying competitive in the market.
PET Injection Machines: Applications and Benefits

Plastic injection molding has become a widely used manufacturing process, especially in the production of PET (polyethylene terephthalate) products.
no data
YUANYOU is striding toward the world with a high-profile attitude, and customers around the world are constantly moving towards Yosion Machinery.
no data
Copyright © 2025 Yosion Machinery  | Sitemap
Customer service
detect