PET Mineral Water High Speed u200bu200bBlow Molding Machine
PET mineral water high-speed blow molding machine, mineral water automatic blow molding machine is a 4-cavity linear blow molding machine, the output reaches 7200 bottles/hour. The PET mineral water high-speed blow molding machines are all fully automatic loading and unloading. In view of the development trend of domestic blow molding equipment towards high speed and high output, the fully automatic stretch blow molding machine is specially developed and developed. The PET pure water blowing machine is mainly used for the blowing of pure water, mineral water PET bottles and various gas-containing bottles. This type of bottle blowing machine consists of three modules: preform elevator, preform unloader and main machine. This series of high-speed PET blow molding machines have many advantages such as reasonable structure, small footprint, low power consumption and gas consumption, good stability, etc., and comply with relevant national food hygiene standards. Ideal equipment for blowing bottles. Product advantages of PET mineral water blow molding machine: 1. Cam linkage servo control high-speed integrated blow molding workstation: The cam linkage servo drive system is adopted to integrate the actions of mold opening and closing, mold clamping, bottom mold lifting and so on. The blowing cycle is greatly shortened, the output is increased, and the effect of high efficiency and energy saving is achieved. 2. Small pitch heating system: The heating head is arranged with a small pitch of 38.1mm, which saves energy by more than 30% compared with the traditional heating furnace, so as to achieve the effect of energy saving. Guaranteed constant temperature. 3. Efficient and stable feeding system: The continuous rotating dial is used to feed the blank, which realizes the fast, efficient and stable feeding effect. 4. The whole machine adopts the modular design concept: Adopting the modular design concept, later maintenance, replacement of changed parts is faster and more convenient, and the maintenance cost is effectively reduced. FG series PET bottle blowing machine function module options: 1. Broken bottle rejection function If the bottle is blown during the blowing process, it can be automatically rejected, and the broken bottle will not be sent to the filling machine. 2. High-pressure gas recovery system After the bottle is blown, a part of the high-pressure gas in the bottle can be recovered and used as pre-blowing gas and operating gas. 3. The furnace temperature and preform temperature detection system can monitor the temperature of the heating furnace and the temperature of the preform after heating in the heating furnace in real time. When the heating temperature of the preform does not reach the set blowing temperature, the blowing station will alarm. , not blown.
Yosion Machinery is devoted to satisfy our customers with a wide array of the finest using experience.
Looking for someone to handle your bottle blowing machine plastic bottle machine needs? Check out Yosion Machinery today for more information.
bottle blowing machine allows users to use in innovative ways that fit their individual needs, while at the same time providing cost-effective, reliable and user-friendly products.