Part of the configuration of the upgradeable model of the blow molding
machine Gas recovery system: Part of the compressed air used for blow molding can be recycled to the air storage tank as the compressed air for operation, which can save 15-30% of compressed air. Fast cycle structure: The synchronous opening and closing of the upper and lower molds of the preform forming mold can shorten the idle cycle by nearly 2 seconds, which is about 10-15% shorter than the previous molding cycle. Strong blow molding system: The upgraded model is equipped with a strong blow molding system (the blow molding force can reach 3MPa), which is more suitable for the stable production of complex bottle shapes. Combined use of hot runner: In the past, the nozzle of the hot runner must be replaced when the preforms of different lengths are replaced. On the current upgraded model, it is only necessary to adjust the number of pads under the blow molding unit, and there is no need to replace the nozzle. In this way, the mold replacement time can be shortened and the cost of the mold hot runner can be greatly reduced. Increased injection pressure: By increasing the injection pressure by 25%, thin-walled preforms can be formed stably. Molding of preforms with a wall thickness of 1.9mm reduces weight and increases speed. Jiangsu Machinery Co., Ltd. is a high-tech enterprise specializing in research, manufacture, production and sales of PET blow molding machine
s. The output of the 4-cavity linear blow molding machine we produce can reach 8,000 bottles per hour, and the 8-cavity machine can reach a high output of 13,000 bottles per hour. As your professional partner, with our mastered and core technologies and continuous innovation, we provide you with professional, comprehensive turnkey solutions.
are present in just about every facet of modern life.
For details on bottle blowing machine, see Yosion Machinery at Yosion Machinery.
We focus on operational procedure and manufacturing facilities of bottle blowing machine.