How to make the blow molding machine energy-saving and environmentally friendly
With the improvement and development of blow molding technology, blow molding technology has been widely used, and blow molding products have become more and more common. Although the performance and quality of the blow molding machine are the key factors that need to be prioritized, with the advancement of technology, people also have new requirements for the blow molding machine. That is, the energy saving and environmental protection of the blow molding machine. This factor is not only a requirement of the blow molding industry, but also a requirement of many other industries. This article will take you to understand how to make the blow molding machine energy-saving and environmentally friendly. What aspects of energy saving and environmental protection are embodied in the blow molding machine? As the saying goes, practice brings true knowledge. This needs to be understood from customers who use blow molding machines. After using the blow molding machine, customers will know where they want the blow molding machine to be energy-saving and environmentally friendly. We learned through some customer feedback that the energy saving and environmental protection that customers want mainly include two aspects: that is, the blow molding machine saves materials and low energy consumption. Customers hope that the same material can produce more products on the basis of ensuring the quality of blow molding products. At the same time, in the process of production, energy can be saved to a large extent, so that the best use of everything can be achieved. Ultimately achieve the purpose of saving production costs. So how to save raw materials and reduce energy consumption? The following content will give you the answer. Start by saving raw materials. Plastic blow molding machine is a special equipment for producing plastic hollow containers by extrusion blow molding process. Because blow molding products have a high degree of integrity, good comprehensive performance, high added value and low cost, most hollow plastic products are obtained by extrusion blow molding. In order to save raw materials, some manufacturers of blow molding products will add some inferior or secondary raw materials to the raw materials. Such an approach is clearly wrong. The quality of the products produced by this method will inevitably fail to meet the qualified product standards. In the production process, inferior raw materials cannot be used. However, secondary raw materials are possible, but they are not directly mixed into the raw materials. It needs to be done through professional technology.——Multi-layer die technology solves this problem very well. In simple terms, the multi-layer die technology is to use raw materials on the outer and inner layers of the blow-molded product, and use high-quality secondary raw materials in the middle. This not only saves raw materials, but also makes full use of secondary raw materials, saving costs. The multi-layer die design makes the production efficiency of the blow molding machine 5 times higher than that of the traditional blow molding machine, and the utilization rate of recycled materials is increased by 4 times. In addition to saving raw materials, it can also ensure a more uniform and stable wall thickness. Below is a solution regarding energy consumption. Energy consumption is mainly related to the parts and auxiliary machines of the blow molding machine. Therefore, to reduce energy consumption, it is necessary to find the problem from the inside of the blow molding machine. When producing blow molding machines, accessories with good performance, low energy consumption and high efficiency are selected. Below is an example we use in production. As the main clamping device, the servo system can save energy by more than 40%, and the energy-saving heater can save energy by more than 30%. The innovative die head design adopts advanced electromagnetic induction heating system, which is reliable, reduces heating time, accurate temperature control, high efficiency and energy saving. Improve work efficiency and save energy by 30%-50%. This article on how to make the blow molding machine energy-saving and environmentally friendly is shared here.
Yosion Machinery thinks that effective market design can improve liquidity, efficiency, and equity in markets.
Yosion Machinery, to be the world leader in products, services and solutions that enable and transform the way consumers and businesses gather, manage, distribute and communicate information.
plastic bottle machine bottle blowing machine is characterized by various advantages, such as plastic blowing machine manufacturers, blowing machine maker and yosion bottle blowing machine, which is not the case with other bottle blowing machine.
There is growing awareness about the health benefits of among the consumers resulting in its increasing popularity.
Our company is professional in manufacturing bottle blowing machine especially bottle making machine.