PROVIDE CUSTOM EDITING

Committed to stable performance automatic bottle production line since 1990s

Blowing Machine

How to maintain the blow molding machine?

by:Yosion Machinery     2022-04-24
Precautions for the maintenance of the blow molding machine: 1. The bottle cannot be taken out of the mold after blowing. First, the mold should be opened, and the mold should be opened and closed manually. If it is normal, run it in the dry running state, if it is normal. Please check your exhaust time setting. If the exhaust setting is normal and the failure occurs every time you blow the bottle, then it can be judged that it is the problem of the exhaust valve. Please open the exhaust valve to check the condition of its spring and seal (this There is also a phenomenon that the exhaust sound is relatively loud or there is an unclean sound). If you encounter a situation where the mold cannot be opened by chance due to the normal production of many molds, please check whether the clamping pin has a segmented screw in it. In addition, please check whether the clamping force is too large. Standard readjustment. 2. Whether the position of the bottle is always pinched by the manipulator is misplaced. 3. The two manipulators collide. In this case, it is necessary to manually reset the manipulator. Please check whether the control contactor of the hoist is in the power-on state. If it is in the power-on state, quickly check whether the motor is in the power-on and load state, because this situation is likely to be caused by the preform (preform) stuck on the lifting belt, At this time, a very simple method is to manually help improve. If the control contactor of the inspection hoist is not energized, please check whether the preform detection electric eye and the reflector are not in the same line. 5. Feeding the old card feeding tray: This situation is a headache. From experience, if the length of the preform (preform) is longer and the weight is larger, then this phenomenon is relatively rare.
Yosion Machinery helps high-profile clients build strategic relationships that drive company growth, investments, funding and more. There are many make-or-break details involved in the day-to-day manufacturing within our company.
Yosion Machinery would like to provide our customers with as near perfect protection, as near perfect service as is humanly possible and to do so at the lowest possible cost.'
Yosion Machinery has never conceded on the quality and the services of the products which provided to the customer.
Yosion Machinery, a manufacturer of bottle blowing machine, might emphasize less hassle or less wasted time rather than emphasizing reliability or quality.
Custom message
Chat Online
Chat Online
Chat Online inputting...