Yosion Machinery Committed to stable performance automatic pet bottle blowing machine production line since 1990s

Blowing Machine

How to maintain and maintain the blow molding machine?

by:Yosion Machinery     2022-04-22
1. The feeding position does not feed: several situations need to be checked: whether the hopper has run out of material, if so: need to feed quickly No: please check whether the hoist control contactor of the blow molding machine is in the power-on state, if it is in the power-on state , Quickly check whether the motor is energized and loaded, because this situation is likely to be caused by the preform (preform) jamming the lifting belt, and the easiest way is to manually lift it. If the control contactor of the check elevator is not powered, please check whether the preform detection electric eye and the reflector are not on the same line 2 Feeding old card Feeding tray: This situation is a headache, from experience If the length of the preform (preform) is longer and the cutting weight is larger, then this phenomenon is relatively rare. 3 The blow molding machine cannot be taken out of the mold after the bottle is blown. First, the mold should be opened, and the mold should be opened and closed manually. If it is normal, run it in the dry running state, if it is normal. Please check your exhaust time setting. If the exhaust setting is normal and the failure occurs every time you blow the bottle, then it can be judged that it is the problem of the exhaust valve. Please open the exhaust valve to check the condition of its spring and seal (this There is also a phenomenon that the exhaust sound is relatively loud or there is an unclean sound). If you encounter a situation where the mold cannot be opened by chance due to the normal production of many molds, please check whether the clamping pin has a segmented screw in it. In addition, please check whether the clamping force is too large. Standard readjustment. 4. Whether the position of the bottle is always pinched by the manipulator is misplaced. 5 When two robots collide, it is necessary to manually reset the robot, which is caused by dislocation
Yosion Machinery who is highly knowledgeable about manufacturing as well as selling and confident in our ability to create finest products as bottle blowing machine plastic blowing machine manufacturers.
Crazy about products? Yosion Machinery is the place you must shop at, do visit Yosion Machinery to check out our latest collections!
The more people who do a certain thing, the more likely others are to do it as well. When Yosion Machinery can demonstrate their popularity or satisfaction across a wide customer base, other consumers are more likely to buy in as well.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...