Blowing Machine
Bottle blowing machine safety operation specification necessary knowledge
by:Yosion Machinery
2020-11-05
(
1)
Per shift boot before, it is necessary to add the lubricating oil in the moving parts.
(
Robots, robot guide, opening and closing mould guide)
(
2)
Swing arm can be (
3 -
4)
Add a days.
Small heating machine big chain chain can be once a month.
Often, heating machine, check the host reducer reducer is short of oil.
Add a host bearing can be 3 months.
(
3)
Check all moving parts are in strong before production, if the screw loose fall off, especially the impact is stronger, belt drive part.
(
4)
Check the high pressure gas source, low pressure air supply, power supply, water supply is normal.
(
5)
Check the urgent stop switch, safety door switch, protection device detection switch is normal.
(
6)
Check the heating head into the embryo, embryo parts work is normal.
Insert embryo does not reach the designated position adjustable nut pressing device.
(
7)
Check whether the tube is damaged, and rupture.
To timely replacement.
(
8)
Check whether the pneumatic components leakage, the movement is sensitive.
(
9)
Check whether the triplet is abnormal leakage, blockage, water cup water is too full.
(
10)
Fully automatic bottle blowing mechanical and electrical magnetic valve when the weather is abnormal, should be timely cleaning clean time> < 3. 5 million per bottle.
Custom message