YOSION Machinery Committed to stable performance automatic pet bottle blowing machine production line since 1990s

Blowing Machine

Bottle blowing machine for safety operation specification

by:Yosion Machinery     2020-09-27
Automatic bottle blowing machine safety control specifications necessary < 1 > per shift boot before, must add the lubricating oil flow in each of the components. ( Robots, robot guide, opening and closing mould guide) < 2 > can swing arm ( 3 - 4) Add a days. Heating machine big chain, small chain can be once a month. Often, heating machine, check the host reducer reducer is short of oil. Add a host bearing can be 3 months. Warm boot ( 2 - 3) Minutes later, the average stay oven temperature rises, embryo in pressing the button. Bottle blowing on electricity will open at the same time, otherwise is not bottle blowing. < 3 > the prenatal check whether all the moving parts and firm, if the screw loose fall off, especially the impact force strong, belt transmission sector. Check the high pressure gas source, low pressure air supply, power supply, water supply is normal. < 4 > when necessary to start the idea, the electric idea, 30 seconds delay start heating machine, in case of voltage fluctuation. Before you start heating ydsky1221 sure didn't open the cooling water. < 5 > check the abrupt stop switch, safety door switch, protection device detection switch is normal. < 6 > check heating head into the embryo, embryo department is normal. Insert embryo does not reach the designated position adjustable nut pressing device. < 7 > check whether tube damage, fracture. To timely replacement. Automatic bottle blowing machine that should be used when starting machinery sector is good, no machine interior, no foreign body. Especially the crank position, so as not to hurt. Close the security at the same time. 8 > < check all pneumatic components are in a flat, whether agile. < 9 > check whether triplet abnormal leakage, blockage, water cup water is too full. < > 10 automatic bottle blowing mechanical and electrical magnetic valve when the weather is abnormal, should be timely clean wash time > < 3. 5 million per bottle. < 11 > bottle blowing mould must be timely cleaning, polishing. < 12 > when you start the high and low pressure gas source switch must slow action, ydskytree fast dirt blow solenoid valve to prevent air supply velocity, at the same time open the exhaust valve for 30 seconds, ensure that the air is clean.
If you have plenty of time, you can learn how to take care of pet bottle making machine manufacturers. Also, invest in the right plastic blowing machine manufacturers bottle blowing machine.
You get a wide variety of security, durability and manageability options across bottle blowing machine. Here’s a link of the brand Yosion Machinery.
We take advantage of high technology to produce products that support safer and better quality and that enhance the using experience of bottle blowing machine.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...