Blow molding machine operation and maintenance methods

1. Preheating The preform (preform) is irradiated by an infrared high temperature lamp, and the body part of the preform (preform) is heated and softened. In order to maintain the shape of the bottle mouth, the preform (preform) mouth does not need to be heated , so a certain cooling device is required to cool it. 2. Blow molding In this stage, the preheated preforms (preforms) are placed into the blow molds that have already been prepared, high-pressure inflation is carried out in them, and the preforms (preforms) are blown and drawn into the required bottles. The automatic bottle blowing machine completes the two operations of blowing the bottle together through the operation of the manipulator, eliminating the process of manually placing the preheated preform (preform) into the blow mold in the middle. Greatly accelerated the rate of production. Operating Specifications 1. Before starting each shift, lubricating oil must be added to each moving part. (manipulator, manipulator guide rail, mold opening and closing guide rail) 2. The swing arm can be added once every (3-4) days. The large chain and small chain of the heating machine can be used once a month. Always check whether the main engine reducer and the heating machine reducer are short of oil. The main engine bearing can be added once every 3 months. 3. Before production, check whether the moving parts are firm, whether the screws are loose or falling off, especially if the impact force is strong, and whether the belt transmission part is abnormal. 4. Check whether the high-pressure air source, low-pressure air source, power supply, and water source are normal. 5. Check whether each emergency stop switch, safety door switch, and detection switch of the protection device are normal. 6. Check whether the heating head enters the embryo, and the embryo drop part works normally. If the embryo is not in place, the nut of the pressing device can be adjusted. 7. Check whether the lamp tube is damaged or broken. To be replaced in time. 8. Check whether each pneumatic component is leaking and whether the action is sensitive. 9. Check whether the triplet is abnormally leaking, whether it is blocked, and whether the water storage capacity of the water cup is too full. 10. When the solenoid valve of the automatic blow molding machine is abnormal, it should be cleaned in time (every 3.5 million blows are cleaned once)
bottle blowing machine are all following the most compatible manufacturing regulations.
Finding the best products has been made easier, at Yosion Machinery. Here you can see completed ranges of produced with advanced equipment and strict quality control. Go to Yosion Machinery and send your enquiry if you have any question.
As the full potential of blowing machine maker lies in , the demand for is increasing globally, and is being adopted across the global market.
The trend toward using plastic bottle machine bottle blowing machine to ease pet bottle making machine manufacturers, once established, soon extended into such additional fields as pet bottle manufacturing machine and blwoing machine company.
Yosion Machinery believes that the shorter the path between consumer and product, the more likely businesses are to convert more sales.