PROVIDE CUSTOM EDITING

Committed to stable performance automatic bottle production line since 1990s

Blowing Machine

Blow molding machine|Machinery is a professional manufacturer of blow molding machines

by:Yosion Machinery     2021-06-09
1. No feeding at the feeding level: several situations need to be checked: whether the hopper of the blow molding machine is out of material, if yes: need to feed quickly. No: please check whether the control contactor of the hoist is in the energized state, if yes Electricity status, quickly check whether the motor is energized and loaded, because in this case, it is likely that the preform (preform) has jammed the lifting belt. At this time, the simple method is to manually help the lifting. If you check that the control contactor of the hoist is not energized, please check whether the preform detection electric eye and the reflector are not in the same straight line. 2. Feeding old card feeding tray: This situation is a headache problem. From experience, if the length of the preform (embroid) of the bottle blowing machine is longer and the cutting weight is larger, then this phenomenon is relatively small. of. 3. After the bottle is blown, it cannot be taken out of the mold. First of all, you should open the mold, open and close the mold manually, if it is normal, run it in the dry running state, if it is also normal. Please check your exhaust time setting. If the exhaust setting is normal and it fails as long as you blow the bottle each time, then it can be judged that the problem is with the exhaust valve. Please open the exhaust valve to check the condition of its springs and seals (this Another phenomenon of this kind of failure is that the exhaust sound is relatively loud or there is a sound of dirty exhaust). If you encounter a situation where many molds are normally produced and accidentally cannot open the mold, please check whether the clamping pin has a segmented screw in it. In addition, please check whether the clamping force is too large. If it is too large, you should follow Standard readjustment. 4. Whether the position where the bottle is always pinching the manipulator is misplaced.
Using our Yosion Machinery to differentiate our content, services and consumer products, we seek to develop the most creative, innovative and profitable entertainment experiences and related products in the world.
If you want to know more about finding the proper for pet bottle making machine manufacturers solutions, visit Yosion Machinery.
Natural has the distinct blowing machine maker which is irreplaceable.
Yosion Machinery must adopts new technology and internal procedures to increase responsiveness and mitigate costs going forward.
Custom message
Chat Online
Chat Online
Chat Online inputting...