Automatic bottle blowing machine safety operation specification necessary knowledge

Automatic bottle blowing machine safety operation specification necessary knowledge ( 1) Per shift boot before, it is necessary to add the lubricating oil in the moving parts. ( Robots, robot guide, opening and closing mould guide) ( 2) Swing arm can be ( 3 - 4) Add a days. Small heating machine big chain chain can be once a month. Often, heating machine, check the host reducer reducer is short of oil. Add a host bearing can be 3 months. ( 3) Check all moving parts are in strong before production, if the screw loose fall off, especially the impact is stronger, belt drive part. ( 4) Check the high pressure gas source, low pressure air supply, power supply, water supply is normal. ( 5) Check the urgent stop switch, safety door switch, protection device detection switch is normal. ( 6) Check the heating head into the embryo, embryo parts work is normal. Insert embryo does not reach the designated position adjustable nut pressing device. ( 7) Check whether the tube is damaged, and rupture. To timely replacement. ( 8) Check whether the pneumatic components leakage, the movement is sensitive. ( 9) Check whether the triplet is abnormal leakage, blockage, water cup water is too full. ( 10) Fully automatic bottle blowing mechanical and electrical magnetic valve when the weather is abnormal, should be timely cleaning clean time> < 3. 5 million per bottle.
Many of us have heard about bottle blowing machine and seen some of these units in operation in plastic bottle machine, pet bottle making machine manufacturers and pet bottle manufacturing machine spaces.
At the heart of bottle blowing machine is our Vision to be the global energy company most admired for its people, partnership and performance.
To ensure desired results, it is very essential that you get the right kind of from a certified provider..