What should be paid attention to in the maintenance of automatic blow molding machine?

What should be paid attention to in the maintenance of automatic blow molding machine? During the working process of the automatic blow molding machine, if there is an old feeding tray, check the length of the preform. Due to the long length of the preform, it cannot be properly placed in the preform container and will get stuck. If the bottle is blown, it cannot be removed from the mold. At this point, the user can open the mold and manually open and close the mold. Or check the exhaust time setting. If the vent setting is normal, there is a fault every time you blow the bottle, it may be the vent valve. Please open the exhaust valve and check its spring and seal. If the bottle keeps getting stuck, it's obviously defective. It is necessary to see if the position of the manipulator is misplaced. If the two manipulators collide, the manipulator needs to be manually reset again, which is mainly caused by dislocation.
Yosion Machinery have now make a decision to enlarge our company in other countries.
During Yosion Machinery’s existence in a market we didn’t receive any negative feedback from our customers.
bottle blowing machine has a very good repute over the global market.
Do you want to find a provider to get your bottle blowing machine problem settled? If so, we suggest that you give a shot to Yosion Machinery. Visit Yosion Machinery to learn more and contact us.