The bottle of the automatic blow molding machine cannot be taken out of the mold after blowing

1. The bottle of the automatic blow molding machine cannot be taken out of the mold after blowing. The first step is to open the mold, open and close the mold manually, if it is normal, run it in the empty running state, if it is normal. Please check your exhaust time setting. If the exhaust setting is normal, and the problem is caused by blowing the bottle every time, it can be judged that it is a problem with the exhaust valve. Please open the exhaust valve to check its spring and seal. (there is another phenomenon of this problem is that the exhaust sound is relatively large or there is a sound of unclean exhaust). If you encounter a situation where the mold cannot be opened occasionally due to the normal production of many molds, please check whether the clamping pin has a segmented screw in it, and also check whether the clamping force is too large, if it is too large Probably re-adjusted according to the specification. 2. Whether the position of the bottle of the automatic blow molding machine is always pinched by the manipulator is dislocated. 3. The situation where two manipulators collide requires manual reset of the manipulator from the beginning, which is caused by misalignment. 4. The feeding position of the automatic blow molding machine does not feed, and several conditions need to be checked: whether there is no material in the hopper, if so : Need to feed quickly. No: please check whether the control contactor of the hoist of the automatic blow molding machine is in the power-on state. The lifting belt is stuck by the preform (preform), and the simple way is to manually assist the lifting. If the control contactor of the hoist of the automatic blow molding machine is not energized, please check whether the preform inspection electric eye is not on the same line as the reflector. 5. Feeding the old card feeding tray of the automatic bottle blowing machine: This situation is a question of comparison headache. From experience, if the length of the preform (embryo) is larger than the length of the cut, then this phenomenon is relatively less. of.

Yosion Machinery is committed to fulfill the demands of our customers with using bottle blowing machine.

What are you waiting for? Don't you want to provide perfect support to bottle making machine? If yes, so, switch to bottle blowing machine right away!

Data has always been important in business, of course. But with the arrival of digital data—its volume, depth, and accessibility—it has become clear it is key to helping Yosion Machinery develop sustainable competitive advantage.