Operation points of automatic blow molding machine

The application of the fully automatic blow molding machine can not only effectively improve the work efficiency and time, but also save labor in operation time. The blow molding machine is mainly used for blowing bottles. The process method is used for blow molding into the bottle that people need, and the production is simple and convenient. At present, the automatic blow molding machine has become an important configuration in the mineral water filling production line such as pure water plants, bottled water plants, and mineral water plants. Precautions before using the automatic bottle blowing machine The automatic bottle blowing machine is mainly used for blowing plastic bottles. The use of various shapes of plastic bottles in life brings convenience. The bottle blowing machine is mainly operated by the oil-free airbag clamping technology, which not only has a large clamping force, but also has less force in the operation of the toggle joint and a long service life. When people use the blow molding machine, how should they operate to make it easier, more convenient, and prolong the service life of the blow molding machine? 1. When people use the blow molding machine, they should carefully check the power supply and control system of the blow molding machine, Whether the heating system is in a normal state, and for the parts that need to be lubricated, it is necessary to add an appropriate amount of lubricating oil to ensure the normal use and operation of the equipment. 2. When using the blow molding machine, the mold should be accurately installed on the blow molding machine, and it should be carefully checked whether the button is already in the exact position, and it needs to be started, debugged or operated according to the specified requirements. Machines and equipment operate and work under normal conditions. The specific operation steps of the automatic blow molding machine 1. When operating the blow molding machine, the preform should first be placed in the preform container, and then the machine will automatically enter the automatic positioning device according to the preform through the conveying device. , and then put the preform mouth upward, load it onto the preform holder and send it into the drying tunnel. 2. After heating, the preform will be sent to the blowing and drawing platform for mold clamping. After the low-pressure and high-pressure blowing and drawing, the gas is removed, and finally the mold is opened. Remove the molded bottle.
Yosion Machinery is the largest manufacturer of bottle blowing machine, which is one of the best product manufactured from us.
More about the most suitable , visit Yosion Machinery to get your offer!
Yosion Machinery integrates research streams on team diversity and knowledge boundaries, and present a framework that considers the kinds of specific knowledge boundaries that must be spanned to achieve high-level, cross-boundary teaming.
bottle blowing machine has its grasp on oversees market also and has a very good repute.
The key to bottle blowing machine is understanding where there is a problem or need in certain markets and knowing how to solve it.