Blow molding machine safety operation rules
Specializing in the production of series of blow molding machine equipment manufacturers, due to its excellent technology, automatic blow molding machines are widely used in food packaging, cosmetic bottle making and candy food packaging and other fields. There are several points to pay attention to when using the blow molding machine: 1. Before starting the machine every day, lubricating oil must be added to each moving part. 2 The swing arm can be added once every 3-4 days. The large chain and small chain of the heating machine can be used once a month. Always check whether the main engine reducer and the heating machine reducer are short of oil. The main engine bearing can be added once every 3 months. 3 Before production, check whether the moving parts are firm, whether the screws are loose or falling off, especially in places with strong impact force, and whether the belt transmission part is abnormal. 4 When starting the machine, the motor must be started first, and the heating machine must be started after a delay of 30 seconds to prevent voltage fluctuations. Make sure the cooling water is turned on before starting the heating. 5 Check whether the emergency stop switch, safety door switch, and detection switch of the protection device are normal. 6 Check whether the heating head enters the embryo and the embryo drop part works normally. If the embryo is not in place, the nut of the pressing device can be adjusted. 7 Check whether the lamp tube is damaged or broken. To be replaced in time. 8 Check whether each pneumatic component is leaking and whether the action is sensitive. 9 Check whether the triplet is abnormally leaking, whether it is blocked, and whether the water cup is too full. 10 When the solenoid valve of the automatic blow molding machine is abnormal, it should be cleaned in time, once every 50,000 bottles are blown. 11 The blow mold must be cleaned and polished regularly. 12 When opening the high and low pressure air source switch, you must move slowly to prevent the air source from blowing too fast and dirt into the solenoid valve, and open the exhaust valve for 30 seconds to ensure that the air is clean. 13 When starting the automatic blow molding machine, it must be ensured that the mechanical parts are in good condition, there is no one inside the machine, and there is no foreign matter. Especially the crank position, so as not to hurt people. Also close the safety door. 14 Check whether the high-pressure air source, low-pressure air source, power supply, and water source are normal. 15 2-3 minutes after the heating starts, wait for the oven temperature to rise evenly, and then press the embryo button. At the same time, the blowing bottle should be turned on when it is powered on, otherwise it will not blow the bottle.
The manufacture marketing game of bottle blowing machine is changing with each innovation, and businesses of all products need to be ready to pounce.
Yosion Machinery will provide branded products and services of superior quality and value that improve the lives of the world’s consumers.
By investing in an ethical supply chain, Yosion Machinery position ourselves to engage with a driven, engaged customer base.
High-quality products are huge boosts when it comes to marketing ideas; allowing potential manufacturers to place themselves in the shoes of a satisfied customer brings them one step closer to understanding the idea of bottle blowing machine.
bottle blowing machine provider at Yosion Machinery offers a wide variety of in many options. quality is absolutely ensured if you choose us. welcome to visit our factory.